Any one know the sizes of the screws (3) for the steering wheel and also the (3) for the shroud?
Thanks

I am putting my steering wheel and components back on. This is for the '67.
The three screws I mention for the steering wheel are where the metal piece with two wires from the shroud go, the metal cap retainer, and the round plastic ring with three holes in it. The other three screws go in from the back of the steering wheel into the shroud to hold it on.
If no one knows, I guess I can just try different ones till I get it right.
Just didn't want to mess up any threads. Probably fine thread?
Any one know?
Thanks

Sorry I cant help you. My 67 wheel is missing one screw also so I am also intrested in this info as well.

I ordered a steering wheel screw set (6) from NPD yesterday. $4.95. Was hoping to just go to the hardware and get them but seems no one knows or bothered to check.
Chris, if you are just missing one, take another out and match it up at the hardware.
Thanks for the reply. I appreciate it.

Chris, if you are just missing one, take another out and match it up at the hardware.

I tried that years ago and remember not being able to find the proper match. Its just one thats missing from behind anyways and hasnt effected anything but would be nice to find the correct screw for it.

Chris,
I should get my screws tonight by UPS. I'll let you know if they are correct fitting.

On a '68, the shroud screws are #10 x 24 x 5/8" round head self-tapping phillips screws.
BillL