Z
Aug 25th, 04, 1:40 AM
383
3.75 stroke-internally balanced,
6" bushed rods
weisco pistons, 8 cc dome 12.5-13 to 1 compression
I am going to try out a set of camel humps that we have first. heads look like they were CNC'd. guy we got them from was running them on a rail, he said somthing about Crane used to port heads, and that is where these were ported.
turbo 350 trans, cheetah valve body. I preentlt own a BTE "10 that will foot brake to 3000 RPM, I do not know the flash. Depending on cam, I may buy the 9.5" BTE its like a 4500. I presently am running 28" slicks with 4.10 gears, I am going to but lower gears depending on what I need for the cam. I own a RPM intake, but also am currently looking for a (Vic jr, team G, strip DOM.)I also currently am running a 650 dp holley with the choke horn removed and blended. 1.5 roller rockers, 1 5/8 headman headers. Car, 83 Z28, 4 link rear suspension,weighs 2900 with me in it currently, I am going to replace the glass with Lexan one day I hope, after motor is finished. I plan on spraying 125-150 Nitrous after I get it tunned/ bugs worked out. I want a cam that will function fairly well off motor and spray, probablly a little better off motor.
I was looking at the XS282s, or the XS290s.
www.compcams.com/information/WhatsNew/Press/XTREME.PDF (http://www.compcams.com/information/WhatsNew/Press/XTREME.PDF)
Any thoughts, recomendations. Advice and opinions wanted. Thanks,
3.75 stroke-internally balanced,
6" bushed rods
weisco pistons, 8 cc dome 12.5-13 to 1 compression
I am going to try out a set of camel humps that we have first. heads look like they were CNC'd. guy we got them from was running them on a rail, he said somthing about Crane used to port heads, and that is where these were ported.
turbo 350 trans, cheetah valve body. I preentlt own a BTE "10 that will foot brake to 3000 RPM, I do not know the flash. Depending on cam, I may buy the 9.5" BTE its like a 4500. I presently am running 28" slicks with 4.10 gears, I am going to but lower gears depending on what I need for the cam. I own a RPM intake, but also am currently looking for a (Vic jr, team G, strip DOM.)I also currently am running a 650 dp holley with the choke horn removed and blended. 1.5 roller rockers, 1 5/8 headman headers. Car, 83 Z28, 4 link rear suspension,weighs 2900 with me in it currently, I am going to replace the glass with Lexan one day I hope, after motor is finished. I plan on spraying 125-150 Nitrous after I get it tunned/ bugs worked out. I want a cam that will function fairly well off motor and spray, probablly a little better off motor.
I was looking at the XS282s, or the XS290s.
www.compcams.com/information/WhatsNew/Press/XTREME.PDF (http://www.compcams.com/information/WhatsNew/Press/XTREME.PDF)
Any thoughts, recomendations. Advice and opinions wanted. Thanks,