Anybody on here have experience with rear frame rail kits??? I have a narrowed Dana 60, 5:13 gear, full spool, moser axles, 4 link that I want to install in the Chevelle. This was in a 63 vette Sportsman.

I guess I am looking for some pictures of how the frame rails will connect to the stock frame. Most of the chassis shops just show a picture of there frame kit.

Motor is a full roller 565 Merlin block, Reher-Morrision alum. heads, 1350 Dominator making 1000 horse. Turbo 400 trans. Should be a low 8 second car when I get it done. ( I know I know! That's too fast for the street)

Thanks,
Brian

Here is a pic of the 63 vette I built.

[img=http://img75.imageshack.us/img75/3273/picture019my6.jpg] (http://imageshack.us)
[img=http://img75.imageshack.us/img75/3273/picture019my6.35f8d45c52.jpg] (http://g.imageshack.us/g.php?h=75&i=picture019my6.jpg)

if you find out some info let me know. Im installing a competition engineering kit that i purchaced from summit into my 69 chevelle.

you can order a 2x3 cross frame from jegs or summit its got the drop for a safty hoop. that would be were i started if i was doing it from scratch.