I am trying to remove the parking brake cable that attaches to the parking brake foot lever. I have disconnnected the cable from the parking brake foot lever but can not remove the cable where it enters the body. Does any body know how to release the clip that holds into the body?

Thanks,

Jon

I screw a gas line sized hose clamp on it to compress the fingers and get it to start through the hole. Once it's in the hole you can remove the hose clamp and pull it through.

I screw a gas line sized hose clamp on it to compress the fingers and get it to start through the hole. Once it's in the hole you can remove the hose clamp and pull it through.

That method usually works just great.

There is also a clip at the other end of the cable which holds it to the frame. That clip can be knocked out with a screwdriver and a few light hammer taps.

Screw driver and hammer and the item should slide out, I did mine last week and didnt have any trouble with it and I am an old man. Hey make sure you take out both clips. I am just starting a 65 chevelle project and i have a basket case. will need a lot of parts so if any one who reads this has any extras Please email me.

i just took my 65 Elky to the paint shop this weekend. I do have spare parts of lots of varietys. Lots of bumpers and brackets, etc. PM me with what you need and maybe it is in my basement.