|
: Rear Bolts Front Inner Fender ccpd166 Jul 17th, 08, 2:48 PM I noticed that the two bolts (lower rear inner fender) missing on both sides. (someone took a shortcut) I see the holes in the inner fender lining up with holes in the I guess firewall. The holes according to the build manual says they are for the dash support. The question is does anyone one what type of washer goes onto the bolt? shows one in the manual. Ground up has no idea... Thanks shadowgray396 Jul 17th, 08, 3:00 PM They are the inner fender well cup washer I believe you are refering too. If you have plastic inner fender wells the washer were not cupped from what I have seen. My 70 came with flat washers on the plastic inner fenders from Canada, but I have noticed the ones with steel have a cup washer. This might be them from ground up. Ray http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=BCW-51&Category_Code=OEMBOLTS ccpd166 Jul 17th, 08, 4:41 PM I look at those, ground up says they dont know if thats them..you think they are? shadowgray396 Jul 17th, 08, 11:54 PM Steve Check this post out. Ray http://www.chevelles.com/forums/showthread.php?p=1917864&posted=1#post1917864 ccpd166 Jul 18th, 08, 7:50 AM Ray yep that looks like them. Ground up has the metal ones, they have no bolt with them. My inner fenders are metal but the one on the left looks more sutible. Were can I get them? Or, do you think I should go with the steel??? Steve shadowgray396 Jul 18th, 08, 3:18 PM Ray yep that looks like them. Ground up has the metal ones, they have no bolt with them. My inner fenders are metal but the one on the left looks more sutible. Were can I get them? Or, do you think I should go with the steel??? Steve What I did was go to a good hardware store and purchased two different size fender washers that were the same size as the originals and got a bolt that looked like the orginal bolt to have the same look. All I could find also was the cup washer style also. Ray ccpd166 Jul 19th, 08, 8:43 PM Ray, are you saying the ground up cup mis correct? I went to the hardware store looking also. No Luck. Let me know..Steve THANKS shadowgray396 Jul 20th, 08, 1:50 AM Ray, are you saying the ground up cup mis correct? I went to the hardware store looking also. No Luck. Let me know..Steve THANKS Steve. I'm going to our club show tomorrow, I'm going to look and see what they have. The car next to me is a 30,000 LS 6 car all Original. Let me see what he has. Ray ccpd166 Jul 20th, 08, 1:00 PM Thanks Ray..I really appreciate your help. Steve bigdave Jul 20th, 08, 3:14 PM Steve, check PM | ||