Does anyone know where to find a wiring schematic IN COLOR for a 1967 chevelle? And...how do you guys get small enough to get to the back of the dash? There is nothing currently in the enterior, so lots of room to lay down, radio, heater core and cover out, center brace, heater assembly, ducting, etc. And thanks for answering my previous posts..you guys have made my life alot easier!

John

classiccarwiring.com.... Check this guy out I recommend it. I bought a 1969 chevelle schematic for my 1969 beaumont it was worth every penny wasnt that expensive either. It is in color he would have one for a 1967 chevelle among others.

This really helped me out. Good luck with it.
http://www.autozone.com/az/cds/en_us/0900823d/80/11/cc/b2/0900823d8011ccb2/repairInfoPages.htm

Does anyone know where to find a wiring schematic IN COLOR for a 1967 chevelle? And...how do you guys get small enough to get to the back of the dash? There is nothing currently in the enterior, so lots of room to lay down, radio, heater core and cover out, center brace, heater assembly, ducting, etc. And thanks for answering my previous posts..you guys have made my life alot easier!

John


Why would you not just take the dash out?? if everything is out of the interior, you can drop the dash in 20 minuets. It's a VERY simple process. Here is a link to a two part artical on removing a 66-67 dash.

http://www.chevelles.com/aces/vol1/aces_8.htm


Rocky

I pulled my dash when rewiring the dash harness, was simple to do by myself and made the wiring job much easier. Side benefit is you can clean the dash parts and replace the bulbs while it is out.