Who makes a reasonable kit for 4 wheel disc kit that includes everything from booster, master cylinder, proportioning valve, brake lines/hoses, hard lines, and park brake hardware/cables?

I purchase a 67 Chevelle that has 4 wheel discs but all the parts are mis-matched salvage yard parts that I do not trust.

I want to avoid off-setting the wheels if possible.

jim

If you have a conversion that was done by using stock parts from later model GM cars you could be ahead in the deal.

If your concerned get it checked out by a shop you trust. Have the system flushed and away you go.

Most of the kits use Chicom or Korean parts. Quality is not as good as original GM stuff. If you want to start from scratch look at using LS1 parts. Great brakes and GM parts but you will need 16" wheels.

The custom kits, Bear etc., are a different deal but $$$$.

http://www.classicperform.com/Store/1955_1970_Fullsize_Cars/5564WBKP13.htm
LOOKS GOOD FOR THE MONEY

http://www.classicperform.com/store/1955_1970_fullsize_cars/5564wbkp13.htm
Looks Good For The Money
Thanks Mike


Jim

no problem.if you buy this kit let me know about it.i have been looking at it for my car

I bought the kit from them and if I had to do it again, I would say no. Customer service stinks, the wheel stud was not seated fully, and they did not return my emails. I would suggest spending the money on a a better kit, sorry.