etracer
Oct 17th, 04, 12:53 AM
Ny car at 3500lbs, goes 8.4 1/8 Gonna change carbs and looking for 8.2;s will see!
|
: who has the fastest, car using th e comp268 extrem! etracer Oct 17th, 04, 3:04 PM anybody? Georgia69 Oct 18th, 04, 9:03 AM What size is your engine? Small block? Big block? 19Nova72 Oct 18th, 04, 12:20 PM With my old setup I did a 13.335@105 with one of the lobes wiped and using 1.72/1.5 valves. The 60' was a 2.0? also. Oh yeah and I was running out of fuel on the top end. gared69 Oct 18th, 04, 12:39 PM Can we see some specs on these engines. mike1985 Oct 18th, 04, 12:44 PM my car runs 12.6 @ 109 on motor, 11.38 @118 on 100 shot and 10.98 @124 on the 150 pill with the NX 262 H cam..smaller than the 268. Mike etracer Oct 19th, 04, 1:29 AM My motor is just stock 350-Vortech heads 373 gear 3500 stall-to high! I run this motor in my 4dr cutlass-I had a 400 sbc alum heads last yr/ ran 8.3 spinning on whitewalls - 8.0's slicks! It has shocked a few newer cars at the track! Ugly cars are neat! 68chevelle533 Oct 19th, 04, 6:37 PM My 70 chevelle has run a best of 12.06 @ 111.32 with the xe 268 cam. etracer Oct 19th, 04, 10:32 PM 68 Chevelle if thats on motor alone your'e the leader so far! 91 Camaro Dec 20th, 04, 7:20 PM Hey Mike, What are the rest of yoru timeslip numbers for that ET/MPH? I have a similar engine setup to you but couple sizes larger cam. onovakind67 Dec 20th, 04, 10:06 PM Earlier this year there was a young man named Bink here with the following signature: 83 Z28, 355,trickflow heads,9.7-1, 268 extreme,RPM performer,650 DP,Headman Headers,Turbo 350, BTE 10 in, Dynomax Bullets, 4.10 gears,25.5" Drag Radials Best: 60: 1.651 1/8: 7.376 @ 93.47 1/4: 11.592 @ 114.72 best pass on 28" slicks 60ft. 1.595 1/8: 7.242 @ 95.20 1/4: 11.376 @ 118.6 | ||