Does anyone have a recommendation on where to get or what to use for a coolant overflow can? I would like to keep it located on the same side as the battery. Aluminum or plastic? What to do for mounting? Any words of wisdom? If you have a cool setup, photos would be good.

Almost forgot, its a 70 small block chevelle.

take a look at this unit .
http://www.chevellecooling.com/m3_view_item.html?m3:item=Over%20Flow%2FRecirculat ionTank%20
Don

I use the collector from a '76 malibu - tucks right inside the fender next to the battery:
http://www.chevelles.com/showroom/data/500/overflowcan.JPG

Here is mine -- very similar to the one offered by Alumitech.

http://www.chevelles.com/forums/attachment.php?attachmentid=14448&d=1213236136

Dave

I bought a Summit one, bent a piece of flat bar, ran a piece of tube under the radiator mount.

http://www.chevelles.com/showroom/data/500/exptank_003.jpg

Thanks for the info folks!

Here is the Mr. Gasket unit.

All stock parts from 82-92 GM F Body (Camaro and Firebird). This setup fits on the fenderwell nicely and takes about 10 minutes to install. You can get all 3 components (bottle, bottle cap, radiator cap), from any Chevy dealer.

http://img.photobucket.com/albums/v249/BlueSS454/P1010022.jpg