hey whats up guys i need to know were does the green wire go connected to, its the green wire that comes from the main engine harness with headlight wires, its a lil forard from the brown brake wire.

Are 68's like 67's? If so you have a engine harness separate from the headlight harness. If its in the engine harness you have a brown for brake (fail) a blue for oil pressure and a green for water temp. Got any pictures including what type of end is on the wire?

no end cut off but i did a lil more reserch and it does seem to be water temp, now ya say oil pressure, for oil presure i have a oil presure tube/line that connects to the cluster to read oil pressure? do i eliminate the blue wire?

If you car is equipped with idiot lights I would leave it. For cosmetic reasons you can neatly tape it back in the harness towards the fire wall plug. Its nice to leave all that stuff there in case you ever want to put it back into service. Mechanical gauges (with the tube)are normally very accurate but don't always get your attention. Some people run both....Good luck sounds like your making good progress.

thanks for the info, yea i wont cut it or anything ill just tuck it and tape it,

now also there is a thick black wire that comes from the junction box and its tape up along with the alt wires, and it also had a like a inline fuse on it? were does that wire go?

also along with those wires theres also a thick red wire not the red wire thats hooked up to the alt pig tail its an aditional red wire?

also there is also a thick red wire thats part of the harness for wipers and ect where does that go and also whats it for?

again tyhanks in advanced for all help