Yep, takin the car to the Dyno on thursday after work. haha The person that gets the closest quess gets a case of beer, if you're not a drinker, you can get a steak on me smile.gif haha jk

So let me know what you think she'll do now...

70 Nova
3050 lbs
400 Small Block Chevy .060 over
3.48 crank Forged Steel crank,
383 Cubic Inches
14.5:1 TRW Pistons
1971 GM aftermarket Heads. 2.02s and ported and gasket matched to Intake
Weiand Team G intake
1 inch spacer...
Holley 850 Double Pumper
CAM SPECS COMP CAMS
Solid-350-400 C.I., 12:1CR ,4000-5000 stall 280/288 advertised duration
250/259 at duration at .050
.530/.550 lift with 1.5s
106 LSA
Th350 Trans with 4000 stall and a 4.56 gear.

Anyone wanna give it a shot?! :D

at the wheels? 425hp/450tq --Coors Light :D

368 HP

385 HP/415 TQ...I'm taking Busch. smile.gif

near 500 at the crank. 14.5:1 !!!! I'll be conservative and say 493 or a freckle over 400 RWHP. I say just under Bob's guess, which I think is going to be close. Let's say 418 RWHP. Make mine a Canadian please.

378hp@5600 425tq@4400 What brand dyno? Dynojet, Mustang?

354 RWHP @ 5800 RPM. 412 RWTQ @ 4400 RPM

405hp,413tq just a guess

a lot more than me. :D graemlins/thumbsup.gif Until the spray! wha ha haa smile.gif

I guess not enough. It's never enough....power more power..ba wa hahahahahahahahahahah.....

392hp 430tq Dave

376/409

above 200 rwhp and under 6oorwhp

422 hp, 443 tq

And I'll take Newcastle Brown, or Negra Modello graemlins/thumbsup.gif

395hp/425tq, send michelob golden light please

What they said. :D Any cold beer will do

At the wheels?? 385/410..........
I'll take a case of Saranac

and the winner is?

I'm getting thirsty here! :D

445/435. Give me Bud Light or Carta Blanca. graemlins/beers.gif

hah sorry guys. Been workin all night today. Well thursday night came and I took my car to the Dyno. Their printer was not working so i get another free run when its back up and working. They ran it the first time the way it was and it ran 376 hp 404tq. Not bad not bad....but the guy said he;ll tune it and get more. He messed with my jets and timing and ran it again. little bit better at 393hp and 427tq. He took my carb off, and put on one of his 750 from his 383. Its a holley DP. Don't know too much about it but i want one! 3rd run was 417hp 448tq. AWESOME. Enough for me. I get another free run so i'm hooking up the nitros for that one. Now his dyno was acting up a few times. Like jumping off the charts, so I dont know how correct this is. But its pretty close to what some of you said. Next time when everything is in order, we'll have to double check!

Rapid Robert i think got the win! haha thanks guys i'll keep you posted!!!

Nice #'s. Can you tell us at what rpm those #'s occurred? Thanks.

550hp @ 6,300rpm / 460tq @ 5,500rpm @ the crank, minus 18-20% @ the wheels.

oops, posted w/o reading page 2.
graemlins/clonk.gif

Uh no, a case of Canadian for my 418 estimate please! J/k , I get the real stuff 10 minutes away over the border.

Nice numbers. While not being a dyno lover, it's sure nice to increase your HP by some tuning and a carb swap!

Strong runner!

Well if you go by your parts, exclude your buddy's expierimental holley, i was within 2hp/2tq, pretty damn good if i do say so myself. So if you could send my case of beer ASAP i would appreciate it, my email is NickLingua@hotmail.com :D graemlins/thumbsup.gif

Just send the Coors Light to the "show-me state" graemlins/beers.gif