BB485
Mar 5th, 04, 12:22 AM
Is anyone using these on a 468 or 496? How well do they flow? Do they bolt in and fit just like iron heads?
|
Wolfplace Mar 5th, 04, 1:24 AM Originally posted by BB485: Is anyone using these on a 468 or 496? How well do they flow? Do they bolt in and fit just like iron heads? = Sold a few set, a couple of which went to other TC members & have heard nothing but good about them. They flow just as advertisied & are a bolt on except for push rods which may be a little longer. The exhaust ports are in the stock location. You might try posting to Bill (CDNSS) as he has recently installed or is installing a set. If you are considering a set email me. I may be able to save you a dollar or two ;) malibuman400 Mar 5th, 04, 1:57 AM Mike you really need to move to southern Cal so I can have a guy I trust in the area smile.gif Wolfplace Mar 5th, 04, 1:15 PM Originally posted by malibuman400: Mike you really need to move to southern Cal so I can have a guy I trust in the area smile.gif = Thanks for the words graemlins/thumbsup.gif but we moved from the SF Bay Area up here to "Gods country" & have no desire to go back :D Besides, our wolves wouldn't like it & we try to keep them very very happy,,,,,, we have to go through the yard to get in the house. :D :D malibuman400 Mar 5th, 04, 1:18 PM Well when I get some $ together for parts ( say 3 years lol) I will order from you smile.gif Wilbur Mar 5th, 04, 6:09 PM I got Brodix BB Race Rite Ovals for my 454 from Mike just recently. I am really impressed with the quality of the parts. I got the 115cc CNC chambers, and had the correct springs installed for the Hydraulic Roller cam installed. The motor is in the process of being reassembled, so far so good, should be back up and running in a couple weeks. This is a street car (no track time), but I wanted a bit more out of it than I was getting. So I replaced the 049 heads with the Brodix heads, and replaced the old 268 cam with an Isky Hydraulic roller. Can't wait to get it running again! By the way, Mike was very helpful with the parts selection, priced right, and everthing shipped without incident. I would highly recommend dealing with him. CDN SS Mar 5th, 04, 8:15 PM I,m on a beach in Mexico right now so internet few and far between but yes BBo with cnc chambers way to go ......... engine will be on dyno when I get back see pics in sig ..........quality excellent and no header clearance issues smile.gif Wolfplace Mar 5th, 04, 9:02 PM Thanks for the recommendation Wilbur, Glad everything got there ok & is going good. Bill,,,,,must be nice :cool: Are you on vacation?? What is a vacation like?? :D :D And thanks to both of you for trusting us with your purchases graemlins/beers.gif chris454ss1970 Mar 5th, 04, 9:18 PM Mike, I will buyinga set of heads in about a month. How much do these heads run $$$$$$, complete? Sorry BB485, I'm not trying to steal your post smile.gif . Thanks guys. Chris Wolfplace Mar 6th, 04, 12:32 AM Originally posted by chris454ss1970: Mike, I will buyinga set of heads in about a month. How much do these heads run $$$$$$, complete? Sorry BB485, I'm not trying to steal your post smile.gif . Thanks guys. Chris Chris, If you email me at the link in my sig & I will be happy to help you if I can ;) | ||