Looking to install AC in my 69 Chevelle that did not come with it. I understand that the glove box needs to be replaced. Where can I get this? Thanks

I think you are talking about the suit case that goes on the engine side of the firewall on the passenger side of the car. You will also need a new glove box liner for a AC car since your car is a non AC car now.
Check out the http://www.chevelles.com/classifieds/
their is some AC stuff in their for sale.

I think you are talking about the suit case that goes on the engine side of the firewall on the passenger side of the car. You will also need a new glove box liner for a AC car since your car is a non AC car now.
Check out the http://www.chevelles.com/classifieds/
their is some AC stuff in their for sale.
The suitcase I have...the glove box liner is what I need. Didn't see anthing in the classified's unless I missed it.

When I got mine at NPD they have 2 different types AC and Non/AC so they should have it.

When I got mine at NPD they have 2 different types AC and Non/AC so they should have it.

I looked there as well. only list for non ac car for 69.

I know repops is the maker on them I just peeled the sticker off mine yesterday.:yes:

I got mine either at Ausley's or Year one, can't remember which.
(that was 22 years ago)

{EDIT} I just checked and they both show only without A/C now.:confused:

I know repops is the maker on them I just peeled the sticker off mine yesterday.:yes:

Thanks, I'll call them tomorrow and see who they are selling to.

Here is their web site. http://www.repops.com/ (http://www.repops.com/)
Clark Industries Inc. - DBA REPOPSŪ is a manufacturer selling only to Authorized stocking dealers.
273 Repop Place
Pearcy, AR 71964
(501)767-1111

'69 AC cars don't really have a traditional glove box that's attached to the dash like the non-AC cars. It's a plastic bin that's attached to the backside of the glove box door. I don't think anyone reproduces them.

Here is their web site. http://www.repops.com/ (http://www.repops.com/)
Clark Industries Inc. - DBA REPOPSŪ is a manufacturer selling only to Authorized stocking dealers.
273 Repop Place
Pearcy, AR 71964
(501)767-1111

I called them this morning and they do not make them for the 69 with ac.

I don't think anyone reproduces them.
I'm thinking you're right.
Trying to remember and now that I think about it I probably got mine from one of the cars I parted out back then.


Try placing a want ad in the free classified section Mike.
http://www.chevelles.com/classifieds/

Anyone have a picture of the AC glove box liner?

Mike, I recently installed Vintage Air unit & smaller glove box came with the kit. Call them to see if you can buy box only.

I got one off ebay a couple years ago. I think I still have the old one but it has a crack in it. It will still work though. pm me and you can have it.

'69 AC cars don't really have a traditional glove box that's attached to the dash like the non-AC cars. It's a plastic bin that's attached to the backside of the glove box door. I don't think anyone reproduces them.


Correct
and it should be noted that the 1969 AC glove box consists of 2 pieces !
In the upper right hand corner of the glove box opening there should be a small triangular shaped board bent to 90 degrees that is felt lined.
not reproduced and getting tough to find.

Correct
and it should be noted that the 1969 AC glove box consists of 2 pieces !
In the upper right hand corner of the glove box opening there should be a small triangular shaped board bent to 90 degrees that is felt lined.
not reproduced and getting tough to find.
I didn't know that these were 2 pieces. I thought they just screwed to the glove box cover. here's a pic of what I thought is an ac glove box liner.
http://pic70.picturetrail.com/VOL1808/9925604/18334711/319907966.jpg

http://pic70.picturetrail.com/VOL1808/9925604/18334711/319907963.jpg

Correct
and it should be noted that the 1969 AC glove box consists of 2 pieces !
In the upper right hand corner of the glove box opening there should be a small triangular shaped board bent to 90 degrees that is felt lined.
not reproduced and getting tough to find.

looked in the assembly manual and see what you are saying. they call it a shield. mine doesn't have it. what is it supposed to do?