Getting to Bremerton [Archive] - Chevelle Tech

: Getting to Bremerton


yanniz
May 31st, 08, 4:41 PM
Hey guys,
what is the best way to get to Bremerton from the Lynnwood/Everett area? The crappy headers that I have sit kind of low in the front and I am not sure if this will pose an issue with the ferries...

Is the Seattle - Bremerton ferry the best way?

thanks

Dave
May 31st, 08, 4:50 PM
The Ferry's shouldn't be a problem, I take the Edmond's Ferry, but Either will work. Just get there by 3:00, don't wanna miss nothing.

FourEightyNine
May 31st, 08, 4:58 PM
I would get to the gates at 2 o clock if you are going through bremerton even on the freeway by it can get a little backed up after 3.

Both ways are gona take you about the same time. I think for you going to the edmonds kingston ferry then driving down would be the best.(I think lynwodd is just right next to edmonds right?) Plus you can probably meet a couple of the guys from the group taking that ferry and just tag along with them down to bremerton.

If you do take the seattle bremerton ferry though the track is about 10-15 miles from the boat.

yanniz
May 31st, 08, 7:10 PM
Edmonds is 10-15 minutes from here....I was going to catch an early ferry and get to the other side of the Sound around 1 or so, grab some lunch and head over to the track...

Have been trying to figure out how to transport some decent tires on this thing, I have the Nitto 555Rs on it now, but they don't do much....don't have room in the car for a second set of wheels, tires, jack, tools, et cetera so I might get some Hosiers and drive with them to the track...

it has been 3-4 years since I have been to the Bremerton track, but I think I can find my way...

thanks guys...

Dave
May 31st, 08, 7:16 PM
There will be tool's and jack's and all that there, no problem to borrow that.

FourEightyNine
May 31st, 08, 7:20 PM
Yeah I drive to the track and swap my slicks there, I am gona have one in the passenger seat and the other in the back seat, along with my tool box jackstands and jack.

You can borrow the jackstands tools or jack if you want.

FRYNTYR
May 31st, 08, 7:32 PM
I'll drive around but I have to be through Everett by 12:30 to miss the traffic. Any later and I hit stop and go traffic.

Takes about the same amount of time to go around ot take the ferry. I'll be towing the car going around is fine. If I was driving the car to the track, the ferry would likely be the way I'd go.

66 Buick Special
May 31st, 08, 10:42 PM
I won't be able to make it to Edmonds until 3:15-3:30.
Schools out in two weeks and Trevor can't afford to miss a day.:(

I'll still get 3 hrs of racing in... :yes: