This site is awesome.
My high beam headlamp filaments were glowing orange when I had low beams on. Seemed like some current was finding a way to ground. Real weird look. So, before I did anything, I searched this site and this forum. Bingo
Found a poster with same problem-- 66 Malibu. He found his solution when unde70SS told him to check the position of his wires in the plastic clips for the low beams on each side. So I did that and found that my green and black wires were reversed. After I followed his advice my problem was solved. Again, thanks Undee70SS for the solution and 66Malibu for posting the problem.

Glad you got that problem solved. Another good search and repair..:thumbsup:
I also had kinda the same problem and it was just a few bad grounds at the core support.

Again, thanks Undee70SS for the solution and 66Malibu for posting the problem.

:D:D:D Thanks for the feedback. There is a wealth of info here in the electrical forum.

thanks for this post. It helped me resolve the same problem when i was wiring my 67ss last week. I remembered reading this post and knew exactly what to do.