Cam/lifters came last week. Thanks for the smooth and reasonable deal graemlins/thumbsup.gif
Motor should be home before Christmas :cool:

Originally posted by ACE841:
Cam/lifters came last week. Thanks for the smooth and reasonable deal graemlins/thumbsup.gif
Motor should be home before Chritmas :cool: =
Thanks Jeff, Glad I could help with your project & I really appreciate the post. graemlins/beers.gif

Are you going to build it under the Tree :D

wolfplace, going to be pulling apart my 461 this winter to take a look at the lifters, its got a 258/268@.50 680-700 lift lunati solid roller(50231 part#) and when I do you will have sold a set of isky red zones. The motor has less than 2000 miles on it but I want it to last cause it runs so well, 11.5 range at 120- 125 mph are the timeslips from the old owner. I was not familiar with what a solid roller needs to run on the street and so I have been doing lots of searching on here and you and harold have provided me with so much info( along with many others) buying them lifters when I get it apart is the least I can do. Waiting for the snow to fall here in iowa before I get it apart, but when I do I will be in contact.

I bought two new sets of red zone lifters thru Wolfy. The lifters came very quickly and were the right ones. My son cleaned the packing grease per the enclosed instructions and then soaked them in oil and put them in. I'm very pleased with the performance and the price and will put the other set in the bigger motor with the AFR heads soon to get ready for next seasons shootout races. Thanks again Wolfy.

Thanks again guys,,
And the Wolves thank you too,, every little bit helps keep them in chicken & we do prefer to keep them well fed,,, Nikolos (our Arctic White Wolf) sends another big sloppy wet kissy kissy,, either that or he is just licking his lips :D