The latest project is almost done, and the last thing i need to purchase is a carburetor. I was hoping you guys could give me some suggestions. Here is some info about the car and motor.

71' chevelle drag car (fiberglass hood and bumpers with a roll cage)
12 bolt posi with 4.11's
turbo 400 with reverse pattern full manual valve body
electric fans, waterpump, and fuel pump
Full MSD electronics

Motor is a 468 with 10:1 compression
Solid lifter Lunati cam (.612/.630 lift, 288/296 duration)
AFR 305 heads with CNC chamber
Victor Jr intake

Car is primarily a strip only vehicle.

Goal for the car is high tens. What type of carb would work best for me?

hp 950

Thanks for the input Brian, that was the carb that I really had in mind.

I'll second that 950HP. I love mine. Real nice carb. Seems to be about perfect for a 454+ sized motor. graemlins/thumbsup.gif

I'll third that....950HP

One more thing,
My Nova with a very similar combo, but with less head went high tens.
Ron

I purchased my Holley from BIGS. I HIGHLY recommmend them - did a great job, and it runs better than I could ever get it to do. Only change I had to make was to the shooter size, here's my original post on it:

http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi/topic/35/2151.html?#000000