can somone help me i need to know where to drill the firwall for the tach wire on my 66 i do have a extra tach harness if somone need's it thanks

RICK

------------------

Rick
I'm not familiar with 66's but according to Factory Assembly Manual, the location is marked by a dimple in the metal below the drivers side end of the long plastic wireing retainer attached to the front of the firewall. Hole size is 1/2". If you cannot locate, I can post a copy of the Assembly Manual page (U16-1, p370) at my web site.

------------------
Fred Aldrich
Web Site: www.GeoCities.com/~69_chevelle (http://www.GeoCities.com/~69_chevelle)

I might be interested in your extra tach harness. Need your email address to get ahold of you.
jason jnickol@ibm.net