Do you have a preference for a 1000 HP capable SBC as to use a Dart or World Products block?

Which has better machine work? Cost isn't much of a concern.

Will be finish bored elsewhere.

Thanks for any comments.

Originally posted by Doug F.:
Do you have a preference for a 1000 HP capable SBC as to use a Dart or World Products block?

Which has better machine work? Cost isn't much of a concern.

Will be finish bored elsewhere.

Thanks for any comments. =
My preference at this time is the Dart.

===========EDIT-------------
Actually if cost isn't a concern I guess my preference would be the Brodix aluminum block :D

Thanks...
Should have stated cast iron.

Doug,
I agree with Mike the Dart is a "nicer" part. We have done 2 small blocks with them in the last six months and they were as close to perfect as you could get.
PS. I will be sending you an e-mail shortly with some EFI questions, keep an eye out for it.

Thanks Bill,
Just give me a shout...
Just send it to my work email.

Doug,
Sent an e-mail to your email link here on Team Chevelle and it got bumped back ? I dont have your work address but if you send it to me, I will give that one a try.