Can anyone tell me what was used originaly to secure the floor shifter,to the floor in a 67??
A picture would be great.... Thanks in advance guys ....... -John

automatic i presume. My 67 assembly manual shows GM part #s 3873951 screw for the front two and 9420065 screw for the back rear two mounting holes. I took out a original and found the closest thing to match the screws it had. They were 1/2 inch long sheet metal bolts they fill the diameter of the hole of the shifter base plate and I believe where a 7/16 head on the bolt. I hope this helps. If you need i can scan the picture of the assembly manual and email it to you. Good luck

Jeff please send a pic,That would be a big help thanks -john