BUBBA2711
Apr 20th, 08, 5:09 PM
http://www.cardomain.com/member_pages/show_image.pl?bg=EEEECC&image=http://memimage.cardomain.net/member_images/12/web/2388000-2388999/2388903_349_full.jpg
My car is a 1971 chevelle 402 with a muncie m20 conversion. It came with 4 whl manual drum brakes. I've since changed it over to frt power disc. But I can't seem to find any pics of the brake line routing for my combination. Any input would be greatly appreciated. Also i know it does not have the spiral armor on the line, and i can probably purchase the lines premade. But i wanted to make them from scratch. What can I say i'm cheap. Thanks in advance.
rianbechtold
Apr 20th, 08, 5:13 PM
The pic doesn't work.
If your going for stock routing(prop valve on frame), I can get you a pic of that. If the prop valve is on the MC, maybe someone else has pics.
BUBBA2711
Apr 20th, 08, 5:24 PM
http://www.chevelles.com/showroom/showphoto.php/photo/15346/cat/500/ppuser/27441 Hope this pic works.
BUBBA2711
Apr 20th, 08, 5:27 PM
For what ever reason i see to be challenged at posting photos on this forum. The pics are in the members 71 showroom.
http://www.chevelles.com/showroom/data/508/medium/HPIM0194.JPG
BUBBA2711
Apr 20th, 08, 7:22 PM
Thanks leo! I needed that.:beers:
BUBBA2711
Apr 24th, 08, 2:55 PM
Just to clear this up. The pic that leo posted is my car. I'm still looking for feed back if the line routing is correct.
cs40racing
Apr 24th, 08, 3:25 PM
I did a front power disc conversion on 72 four door, I have the prop valve up next to the master cylinder feeding the original dist. block, I am pretty sure you can run it the way you have it setup.
rianbechtold
Apr 25th, 08, 4:03 AM
Just to clear this up. The pic that leo posted is my car. I'm still looking for feed back if the line routing is correct.
Yes, that is correct. Sorry for not posting any pics!
I was going to post a pic of my old set-up but figured it would be easier to see with the new parts so I went to install them only to have a very UNPLEASANT time doing so! 4 DAYS LATER I am just now sorting it all out! (One company sent the wrong prop. valve; the line company sent a bad set apparently, my old prop. was rusted to the frame, almost all fittings were rounded off!! It was a nightmare!:sad:)
BUBBA2711
Apr 25th, 08, 6:19 AM
Thanks rian. I was going off of pics i took from one of my friends cars and memory. When i get the spiral armor it will really set the assy off.