|
Randall B. Apr 19th, 08, 10:15 PM I ordered the plates that are intended to be welded on to the lower control arms so they are boxed, the problem is they don't send any template or anything with them. Does any one have any ideas on where they need to be located so they will work with a sway bar? I'm at the end of a long day and hope someone has some good news. Thanks SS70ElCaminoOwner Apr 19th, 08, 10:48 PM I ordered the plates that are intended to be welded on to the lower control arms so they are boxed, the problem is they don't send any template or anything with them. Does any one have any ideas on where they need to be located so they will work with a sway bar? I'm at the end of a long day and hope someone has some good news. Thanks These links should help you out. Rear Lowers How to Box Rear Lower Rear Control Arms (http://www.leverfamilysite.com/Boxing_Lower_Control_Arms.htm) Sway Bar Hole Spacing (http://www.leverfamilysite.com/Sway_Bar_Hole_Spacing.htm) bdc1013 Apr 20th, 08, 2:33 AM I have some stock boxed lower control arms if youre interested | ||