Need help putting the black and green (from horns and are combined on 1 connector) back onto the horn relay. With the relay mounted on the radiator support, there are 3 wire connector tabs on the bottom of the relay and are at the positions of LF, LR (LF and LR both have a plastic shroud) and RF. Where does the connected greens and black wire go. The AIM shows only general wires going to the relay, but no detail as to exact locations.

Thanks for the help - I'll print the answer and stick in the AIM for the next time I forget.

This is from a '70 but may give a better idea...
http://www.chevelles.com/forums/attachment.php?attachmentid=9834&d=1193328588

Can anyone confirm on a '66 horn relay that the black and green are in the same position as the picture above?

Thanks,

The red is the same place as mine, but you have a black and green with a separate connector for each , I have a single connector with two greens to the horns.


Rocky