Hi Harold,
Am looking for a replacement cam for a street driven 9.5:1 396 and can't help thinking your old BB276/286H12 would be perfect (221/230 at .050, .515"/.515" valve lift, and 112 LSA). Any chance this is available still???

best,
Mike S.

Man Mike, I would have had you hooked up if your were looking for the SB version! Good Luck though!

Steve D 64 SS-,
What are the spec's on the small block version?

Ultradyne web site is now down.

SB276/286H12 is 221/230 I/E @ .050" and .454" lift on I/E on a 112 lobe sep

Man Mike, I would have had you hooked up if your were looking for the SB version! Oh well, that is usually the case isn't it? Everyone has what you don't need tongue.gif Don't really want to go with the XE268, especially since I don't have hardened seats! Perhaps the Crane Powermax H-272 will suffice. Wouldn't mind experiencing first hand though the UDHarold advantage :D

Thank's Steve.

Well, its not "overstock" but, I have a new-in-the-box 288/296 hydraulic UD cam that I will part with if anyone is interested. Its probably alittle more than you are looking for Mike, might be a bit too lumpy on the duration side. According to Harold, its good for 475 hp+ in a 468 with minimum 9.5:1 compression.

The BB276/286H12 will be available either next week, or else in a week or so. We are having a meeting tomorrow morning (Monday) to discuss my cam orders and their availability. If this cam is not available in a reasonable time, it is due to book-keeping/paperwork, not our ability to ake the cam.
Give me a call next week, but not Tuesay, as I may be out all day.

UDHarold