can anyone tell me how to remove the and replace the vent pull knobs and e-brake knobs . thanks for any assist :confused:

I had to cut mine up into pieces with a set of dikes.

The vent pull knobs will have to be cut off. The E brake handle should unscrew.

Thanks ! will try both,

The quickest and easiest way to remove a vent knob is to grab the stem with channel locks and crush it. Don't ask me how I know... :D BTW: They can be difficult to press on all the way without destroying other things in the process, but drilling out the hole a bit and using epoxy makes it a bit easier.

thanks again for the replys, always helpful to talk to someone thats been there! Jim