OK I have a tenative dyno day set up at DDP in Monroe.
Lenny said he would like between 5 and 10 cars and he wants to start at about 8:00 and try to be done by 2:00 (this should be easy) the earlier the better he said. The cost would be $50.00 each and this would be for a few pulls each. I told him I may bring the race truck down and he said it would not be nice for me to make the cars look bad on the dyno :hurray: I should be around 850hp on fuel :thumbsup:
He told me to tell you guys he does not have a 5 gas sensor that you guys like to use to see how your fueling is going. That one probe is like $1,500.00 and he does not do enough cars to make it worth while. If I get the Chevelle running tomorrow (that is the plan) I may dyno it. On second thought no I wont because I have to work this weekend so I will not be there :(
Lenny said he will call me tomorrow and let me know if it is a go or not. He has to get a tech guy to help him run the dyno and check with the wife before commiting to a Saturday.

I hope this works for you guys

You have 2 now...:D
I look forward to finally meeting you...:thumbsup:

I wonder what kind of #s the XB would put down??:D

I wonder what kind of #s the XB would put down??:D

l:) :rolleyes: :secret: I think there is a minimum amount of hp required to at least get the roller spinning... :sad:

l:) :rolleyes: :secret: I think there is a minimum amount of hp required to at least get the roller spinning... :sad:



l:)l:) Ya I think your right but I will put it up against the pink scooter anyday

Hoss- What is the actual name of the place. I have a friend with a hot Nova that might come. He said if it's Dynamite Diesel something, the guy was pretty harsh on his truck last time.

I'm there! Thanks a ton. :thumbsup:

Almost forgot Mr. Monza will be there too.

http://bigblockduster.com/images/small/martin_new_paint.jpg

I'm shooting to do it too. Have a nice trans leak I have to investigate and fix before Saturday. Wish the Air/fuel sniffer was an option. I was hoping to see if i could see if my 950 HP is running rich or lean enough on the 355. Maybe a .1 or .2 more could be had.

Wish the Air/fuel sniffer was an option. I was hoping to see if i could see if my 950 HP is running rich or lean enough on the 355. Maybe a .1 or .2 more could be had.

Like I said, read your plugs and adjust as needed. Still a good test bed.

Hoss- What is the actual name of the place. I have a friend with a hot Nova that might come. He said if it's Dynamite Diesel something, the guy was pretty harsh on his truck last time.

Here is the web site http://www.dynomitediesel.com/

Looks like we might have 4....... Not enough yet. Spread the word.

Hoss- What is the actual name of the place. I have a friend with a hot Nova that might come. He said if it's Dynamite Diesel something, the guy was pretty harsh on his truck last time.

Do you mean when he ran it on the dyno? I am pretty sure he will let you run your own cars on the dyno. I always dyno my stuff myself. The place is Dynomite Diesel Performance. Lenny is a good guy and he will do right by you.

You have 2 now...:D
I look forward to finally meeting you...:thumbsup:

I have to work so I will not be there :( However you guys are welcome to cruise over to my place afterwords and we can check out your dyno sheets over a couple wobbly pops and a burger :thumbsup:

I will make a pull on the pink scooter, just gotta have smoeone sit on the back to keep traction on the tire. Doc think we could rig up some NOS to it?:D

In all seriousness I hope this dyno happens I am supposed to make a guest appearance at this thing. Wont be bringing my chevelle due to serious lack of power right now

Let me know if we have enough. I am alos bummed there is no o2 sensor.
I did hear you about pulling plugs but things get very hot after a pull and reading a monitor is much more convenient.
Like I said, there should be 2 here coming and can you really run your car as opposed to them doing it for you?

Here is the deal...... I need 5 or more cars/trucks by the end of the day. If there isn't enough I will call the place in Marysville and me and Mr. Monza will go there. It is important I dyno because my carb is running fat and I am hoping it either clears up under full throttle or I can play around with air bleeds.

Jim- If I had my preferrence, I would like to go to the Marysville shop. I think the guys name was something like "Cam" but I can't remember. They are open on Saturdays and would probably give us a break for bulk. It looks like we have 4 right now.
Again, I like the o2 readings to help with my A/F mixture.

Should I call Lenny and tell him we are not going to do this???
I hate to let him think we are coming and drop out at the last minute.
He is planning to open his shop on his day off for this.