RUST IM THE TRUNK=( [Archive] - Chevelle Tech

: RUST IM THE TRUNK=(


Hot66ss
Jul 14th, 99, 4:07 PM
After looking in my trunk today I found that there is some surface rust under the 1/4 panel lip that follows to all the way back between the 1/4 and the wheel well. I cant get back there with a wire wheel or grinder. how do I attend to this rust? Keep in mind I drive this car every day and tearing it apart to pieces is out of the question.

Thanks For The Help


------------------
Hot66ss

66 ss
67 malibu
Aces Member 2380
Team Chevelle member #262
Http://members.aol.com/chvellss

283v8
Jul 15th, 99, 11:33 AM
The only way I know is the oldfashioned hard way - by hand with sandpaper folded to suit.
Do a little or alot at a time. Then coat it with a real rust preventive coating like the red stuff Eastwood sells - GEEEEE - I can't remember the name of it.With that stuff, you don't need to get it all, you can cover rust.
Found it on the Eastwood site; Corroless
www.eastwoodco.com/cgi-bin/sgdynamo.exe (http://www.eastwoodco.com/cgi-bin/sgdynamo.exe)

------------------
Gotta have a Chevy !


[This message has been edited by 283v8 (edited 07-15-99).]

72CHEVELLE
Jul 15th, 99, 11:49 AM
That would be the only way to do it in tight quarters. Scotchbrite works pretty good too. Good luck.

JWagner
Jul 15th, 99, 1:06 PM
If you can stand the mess, maybe sand blasting could do the job. But what a mess it would be.

Steve S
Jul 15th, 99, 2:26 PM
Por-15!

------------------
Steve Strasemeier (70SS 396, Fathom Blue/White Stripes)

hga69
Jul 15th, 99, 4:29 PM
The stuff Eastwood Co. sells is called Corroless. I've used it with much success.

Hot66ss
Jul 15th, 99, 6:09 PM
Thanks for all the imput I think im going to wire brush it sand it then coat it with the eastwood stuff. has anyone ever used stuff called extend?

thanks for all the help

------------------
Hot66ss

66 ss
67 malibu
Aces Member 2380
Team Chevelle member #262
Http://members.aol.com/chvellss

Gene Chas
Jul 15th, 99, 9:04 PM
I was thinking about Extend. I have rust on the floor of the trunk and I was going to whack it with that stuff first. I've only used it once, on the hood of a ( gulp) Spectrum. It worked as advertised and the rotted out hood repair lasted for over one year until I sold the car. It has a chem reaction with the rust and neutralizes it. Then you prime and shoot.

Hot66ss
Jul 15th, 99, 9:41 PM
Sounds like good stuff!!! I think I'll use that.


Thanks

------------------
Hot66ss

66 ss
67 malibu
Aces Member 2380
Team Chevelle member #262
Http://members.aol.com/chvellss