I've seen alot of posting about the lack of repop trunk gutters. Has anyone actually bought a set of the Goodmark Camero gutters and tried them? What about the piece between the lower rear of the trunk and the bumper?

I've seen alot of posting about the lack of repop trunk gutters. Has anyone actually bought a set of the Goodmark Camero gutters and tried them? What about the piece between the lower rear of the trunk and the bumper?
Most years are being repopped as complete trunk floors which give you the brace you mention. Although as I see it, they are not galvanized as original. Only a matter of time I suspect before they begin selling the rear brace as an individual piece. Chances are if your rear brace is toast, so is the trunk floor above it. The trunk gutters are coming........................:rolleyes:

The rear inner brace is ok.It is galvanized and alot heavier metal that the outside piece I'm talking about.There is some of the tail parts available but they start at 66 and go up...nothing for 64 & 65.

The rear inner brace is ok.It is galvanized and alot heavier metal that the outside piece I'm talking about.There is some of the tail parts available but they start at 66 and go up...nothing for 64 & 65.
That's been the story all along with repops. Nobody makes anything for 64-5. Doubt very seriously they will change that anytime soon unfortunately.

hey guys, I just rec'd the trunk gutter for the 67-69 cameros that Goodmark sells.There is no way, they will work on the chevelles, especially the 64 & 65 years. The only part that might work is the very innermost portion and then only if you had most of your original gutter remaining... and you'd need about 2 or more kits to get it done...not even figuring in anything for the curved areas. Sorry guys, I was hoping we might have found a solution...but..not yet!