I've got a 4spd on my 327,only problem is i don't know what it is.It is aluminum and 3 people have told me three different possibilities but no one could identify it.Can anyone tell me how to.Thanks again.

------------------
Ray{Surrey BC}
65SS chevelle
65 2dr chevelle
65 el camino
team #241 gold


[This message has been edited by 65ss (edited 07-14-99).]

How many bolts does the shifter cover have?

7 = Munice or Saginaw
9 = Borg Warner

if 7:

The side cover on Muncies are quasi-trapezoidal (they appear to be wider along the top edge than the bottom edge.)

Saginaws are more ovally in shape.

I hope this helps for a lo-tech visual examination

[This message has been edited by michael j (edited 07-14-99).]

Thanks micheal I'll check and count the bolts when i get to the shop in the morning

------------------
Ray{Surrey BC}
65SS chevelle
65 2dr chevelle
65 el camino
team #241 gold

quasi-trapezoidal!!!!!!!!!!!

Yeh. That is exactly correct. With a little hump at the top of the center for the top center bolt. Couldn't have described it better Mike.

------------------

BTW, if you download the Hurst catalog( www.mrgasket.com) they have a tranny ID section that's not bad. It's a big download though ( 7 megs) so you better be running a cable modem.