ever heard of making a hyd roller a solid roller ? comp cams says i can do this but i wil have to set my lash at 2-4 thousnads that seems awful tight ? anyone ever done this feedback please wolf place ? anyone :confused:

There's a post about that running around here somewhere right now...someones Camaro running in the 10's


Update on Hybrid cam experiment...
here it is (http://www.chevelles.com/forum/ultimatebb.php/topic/4/22950.html)

ok well thanks that didnt say much /or i used it wrong

Originally posted by copo69:
ever heard of making a hyd roller a solid roller ? comp cams says i can do this but i wil have to set my lash at 2-4 thousnads that seems awful tight ? anyone ever done this feedback please wolf place ? anyone :confused: If its a hyd roller grind that's correct.
You want to set the clearance at .002-.004 HOT. You can play with the adjustment a little to see if it likes more but not by much, probably .006-.008 at most as you basically have no clearance ramps like a solid.
It is the same way you set Comps Pro Mag hyd lifters.
If you have aluminum heads I would set them a zero cold to start & see what you end up with. It will be real close to .004 hot on a small block.