How do you remove the A/C condenser once all of the lines and brackets are removed. The tube to the compressor discharge line goes through the radiator support and dooes not allow the condenser to come straight up.

HELP!!!!!!

Jon

When a 70 Chevelle is built. The CORE support is bolted to the frame rails----- The A/C condenser is bolted in. Then the car is built around this ! For the condenser to exit the core support, it must go forward about 6-8 inches. YES you are correct a lot of pieces and parts have to be removed. For a start, Hood latch,Grill, Fender extensions,Horns,Frt. Bumper. A real PITA !!!!!!!!!!!!!
Bob:noway:

you are correct.i just finished up all that stuff came off. that is a case of looks are decieving what a pita.thanks for the reply.