(67ss396)both my doors arent flush with the quarters...the front of the doors on the fender side are pretty good...do i need to replace the hindges or bushings or something??or is it maybe something else...its not that bad id say about a 1/4-1/5 inch off....but still enough for me to notice and want to fix ASAP thanks for the help guys!
steve

Being only slightly skilled in body work I would try to adjust your door striker bolt. If your doors are in too far slide the bolt out. If in to far slide the bolt out. If they are in at the top and out at the bottom you will have to play with your door hinges. JC