aight i got my motor back together and she has a peppy top end thats for sure.....

350 bored 60 over KB 120 pistons about 9.7 to 1 comp
my heads are 441s and were 76cc but we resurfaced and cut um down I figure they are in the 70cc or maybe 64cc range.....
the block was decked 30 over and the head gask is that really common Mr. gasket that everyone uses.....
the cam is a comp xe 268 h 10
edelbrock torker 2 intake (I know I know)
holley 600 cfm carb and the cam is installed straight up........

she spin up to 5 grand like its nuthin but she has a bit of a low end bog....I need to play with my timeing some more and get my carb tuned...... but once that is all done what kinda HP numbers do u think shell kick out......

What cam do you have? Carb may be a little small! what gear ratio? :cool:

I'll guess about 340 hp but I am usually conservative!

gears are 3.08s not posi ( I KNOW I KNOW)

the cam is a comp Xtreme Energry 268H-10

i have a stock convertor in my th - 350 im gonna try and get a 2600 - 2800 once I get a job

and a posi rear of some sort maybe some 336s or maybe 355s ya never know..... thall prolly have to wait til nevxt year

Guess ya just answered your own question huh?! 355's would work really well gettin off the line! Hang in there, its gonna all come together for ya! :D

You kind of have a in between. The small carb is holding your HP down, but your intake is hurting your torque.

http://img.photobucket.com/albums/v608/DynoRun/Dyno1206042a.gif

http://img.photobucket.com/albums/v608/DynoRun/Dyno1206042b.jpg

wow 361 hp and 346 ft lbs.......

with that being said if i switchd to a 2800 stall in my th 350 and a posi 355 rear what kinda et's am I looking at?

RHAMM thankz alot

Guess I missed what car, wt. you are running?!

Keep in mind that digital "dynos" tend to be a little optimistic.

Your real measure of HP will be your MPH.

When are you going to run this thing? I'm VERY interested in what this thing will run.

Good luck.

What's this about you getting pulled over I'm hearing?