moroso part#20190.7 quart street/strip pan with 8 1/4" kick-out sump.will this pan have enough clearance for my 3.750" crank with scat 4340 6" i-beam 7/16"capscrews stroker-clearanced rods? how about adding a windage tray? thanks. :confused:

:confused:

I'd think it would clear.
I'm running a stock pan with cap screw rods.
I don't recall having to clearance the pan rail.
But if I did, it was maybe a 1/16" at most in one spot.
As far as the tray, it depends. Mine is stud mounted so it fit of course.

I am using a 20191, which I believe is the exact same pan except mine has a built in windage tray and crank scraper. I am also using a scat 3.75" crank and 5.7" scat capscrew rods...no clearance problems with the pan at all, but I did have to clearance the block quite a bit in the pan rail area.

thanks a bunch guys! :D