Found a set of 67 power windows out of a 67 cutlass convert. Does anyone know if there the same for 66/67 chevelle hardtop?????? I laways thought the std. window setups were the same but now sure on the power setups............THANX

I have 67 Buick Skylark HARDTOP power window set up in my 67 hardtop. The Cutlass stuff will work on the front windows but I think you will have problems with the convertible rears. Rear convertible windows and tracks are tipically different than the hardtop stuff. You can get the door switches, rubber door boots, complete power window harness, & frt. window regulators. You can use your original windows. I would get the rear window regulators, tracks, and the windows if they don't cost much extra but I don't think you can use them. If you have them you can compare to what you have and possibly make them work. There is a substantial wiring harness that goes with a power window car and do youself a favor and take the time to dissasemble the Cutlass to get it out in one piece. You will notice that you have to drill holes to mount the power regulators in the doors. I"m guessing that I had to drill over 20 new holes to install everything correctly and the funny thing is that there will be a dimple in your sheet metal for each hole. Expect to have to pull your doors to drill the door jams for the harness boots. E-me if you have any questions