I'm curious if anyone here has used the March billet brackets on a big block and how much trouble were they. I have the setup and I just don't see how the kit allows for belt tension and the amount that it does allow is extremely small. In particular, my saginaw pump is hitting the adjustment screw on my steering box and the upper March bracket is hitting the excess material around the pump shaft.

TIA

Mike

i used the same setup on my bigblock,i had to shim it here and there with washers (not close to were they tell you to put them) to get it to align properly and also i think i bought a smaller belt then they recommend,after i adjust the tension my pump is barely touching the steering box bolt.