i have a 1971 Chevelle with a 454 bored .30 over. Im running the stock scat crank and rods. Attached to SRP pistons. With the New Edelbrock performer heads the CR should be about 9.8:1 to 10:1. Im running a Proform 850 Dp and an Edel. Victor Jr. intake along with Msd 6aL and pro billet dist. Im putting it to the ground thru a th350 with a Hughes race kit. Its backed by a 3000 stall Hughes race converter. In the back its all new suspension components (up front and in the rear) and its a 12 bolt with 410's and a posi unit. The tires are M/t 28x11.5x15's on weld draglites. And on top of all this is a Nitrous cheater kit. There seems to be some good motor people on here i was just curious if maybe someone could let me know of some numbers i might be running or some HP estimates id be close to. thxs Jason

Hi,

What size are your intake and exauste valave and what are your cam specs, are you running headers, probably are, what size?

hey sorry, i just thought about it. i forgot to post my cam. its a CC magnum energy 249-11-214-4 305H .575'' lift 3000-6800 rpm and ya. hooker supercomp 3 inch headers.

oh and 2.18/1.88 valves