Well I am well on my way to putting the second set of quarters on my GTO. The first set I put on I didn't like how they came out. I cut them off and ordered another set and have installed the drivers side and it came out real nice. After the weld was ground down, you could barely tell it wasn't always there. A little plastic and the seam will be invisible. I just cut the passenger side off and will be fitting it today. I guess it just like that old saying "if at first you don't succeed, try try again". One thing it gets a little expensive.
I also opened a photo bucket account and will get that up and running so I can post some pictures.

I wouldn't know anything about that :)

Yea right Andy, Look at the bright side Andy at least you lost your title of Mr. quarter:yes:

yeah but I'll hold the title of Mr. Bondo forever

Bondo won't rust.

Bondo won't rust.

hey, it's Mr Floor Pan

I turned over a new leaf, less posting and more reading.

Bunch of hijackers:D but since bondo wont rust according to Mr. Floor pan or Mr. Bed Pan:D

Good one:)

Steve, I don't know if I mentioned it, but my buddy bought a 67 gto new, 400 ram air four speed, with 433 gears.

Looking forward to the pictures of your quarter panels.

Rob

Steve, I don't know if I mentioned it, but my buddy bought a 67 gto new, 400 ram air four speed, with 433 gears.

Looking forward to the pictures of your quarter panels.

Rob


All 4 of them.

I started reskinning my doors. I might claim the title of Mr. Door Skin pretty soon :)

I don't know Andy, I will be taking care of my doors soon, and it usually takes me 3 or 4 times to get things the way I like them.

I used a gallon of bondo on the quarters to get them right, then decided I didn't like how the welding came out. Even though the welding was now under the bondo. And I got the quarters real straight.

I turned over a new leaf, less posting and more reading.

How about less posting, less reading and more work getting done.
I think Ive seen two birthdays pass since you started those floors:)

How about less posting, less reading and more work getting done.
I think Ive seen two birthdays pass since you started those floors:)

Everytime I get ready to go out and work on them, you post something new http://www.chevelles.com/forums/showthread.php?t=209831 then I get off track.:)

How about less posting, less reading and more work getting done.
I think Ive seen two birthdays pass since you started those floors:)Thats about the truth, LMAO:D Stop showing Rob new stuff the poor guy gets very confused easly, cant you tell...

Everytime I get ready to go out and work on them, you post something new http://www.chevelles.com/forums/showthread.php?t=209831 then I get off track.:)
Stop reading Rob and get your A$$ to work on your car, come on now I am going to get a bunch of TC members to start riding riding you to get your car done..
Git-Er-Done!

Thats about the truth, LMAO:D Stop showing Rob new stuff the poor guy gets very confused easly, cant you tell...


Stop reading Rob and get your A$$ to work on your car, come on now I am going to get a bunch of TC members to start riding riding you to get your car done..
Git-Er-Done!
This coming from the guy with a 100 year (and counting) project himself.:D

I ain't saying nothing.. :D

This coming from the guy with a 100 year (and counting) project himself.:DHey now a little over 2 years and almost done:yes: I have to do other projects also the honey-do list always comes first...:(

Hey now a little over 2 years and almost done:yes: I have to do other projects also the honey-do list always comes first...:(

If you would have put her through a good training program when you first met her, you wouldn't have a honey do list.

No tail wagging the dog here.:)

If you would have put her through a good training program when you first met her, you wouldn't have a honey do list.

No tail wagging the dog here.:)I have to tend to all the real estate property that we own and that alone is a chore.:yes:

I have to tend to all the real estate property that we own and that alone is a chore.:yes:

I wish I had that problem, this little postage stamp I'm setting on doesn't take much, plus I'm in on the south side of the tracks, don't want to make it look to good, they'll come in here and steal it. Good thing I have these guard dogs.:)

By the way, I haven't seen any pictures of your ride lately, how about an update. One with you and your bride setting in it.

I fitted the passenger side quarter today. It took me about an 1 1/2 hours to do it. I guess when you do it so many times you know what you are looking for in the fit.
I think I should have welded zippers on with them so I can just unzip them and replace them if I feel they don't look right.

I guess when you do it so many times you know what you are looking for in the fit..

I wouldn't know anything about that

I think I should have welded zippers on with them so I can just unzip them and replace them if I feel they don't look right.

there's an idea

I don't think Rob even has a car. I'll bet those are all paper cutouts :)

I don't think Rob even has a car. I'll bet those are all paper cutouts :)LMAOROF:D:thumbsup: I think Rob is just or his wife is a photoshoper:yes:

I fitted the passenger side quarter today. It took me about an 1 1/2 hours to do it. I guess when you do it so many times you know what you are looking for in the fit.
I think I should have welded zippers on with them so I can just unzip them and replace them if I feel they don't look right.

That would have taken me 6 weeks, how about some pictures.

That would have taken me 6 weeks, how about some pictures.


I have to get my daughter to help me put the pictures on photobucket. I am lucky I get on the internet.

I have to get my daughter to help me put the pictures on photobucket. I am lucky I get on the internet.Dont feel bad Rob is the same way, LOL:D

I have to get my daughter to help me put the pictures on photobucket. I am lucky I get on the internet.Plug in your camera (digital) to your PC and the rest should be easy! :D

If all else fails, just read the instructions. :D

Plug in your camera (digital) to your PC and the rest should be easy! :D

If all else fails, just read the instructions. :D


Instructions? only if they have big pictures.

Actually I have all the pictures down loaded onto my computer, I just have to find the time to do it.
You know putting quarters on and tearing them back off is time consuming.

I actually thought about redoing one of my qarters, but not at $400-500 a pop. Since I'm going to drive the hell out of I figured good enough was good enough!