|
bbmusclecars427 Jan 25th, 08, 5:12 PM I have done alot of looking on line to find a COMPLETE master blot kit for my 70 chevelle SS but most are incomplete by not furnishing new bolts for my door hinges.I also have seen "black stainless"bolts listed by the paddock.They think alot of their kit @$280.00 plus over $40.00 for S/H.Anyone had good luck elsewhere w/ a "complete kit" at a reasonable price?:confused: bowtie6872 Jan 25th, 08, 5:27 PM 320.00 will buy alot of wire wheels why you need all new bolts?? BlueSS454 Jan 25th, 08, 5:54 PM If you want complete and correct, go to www.amkproducts.com 350_Malibu Jan 25th, 08, 8:08 PM 320.00 will buy alot of wire wheels why you need all new bolts?? So they don't continue to rust (which they will) and sieze all the bolts up. Worst thing you can do is wire wheel a bolt, paint it and reuse it. If you want complete and correct, go to www.amkproducts.com (http://www.amkproducts.com) I second the AMK kits. Good stuff and about as complete as you can get. :thumbsup: Although my kit did not come with the door hinge bolts either. I bought hinge bolts from Ground Up but they are kind of spendy @ $1.75 each (24 total, you do the math). bbmusclecars427 Jan 25th, 08, 9:06 PM Thanks for the info....I knew about amk products but I didn't know until I saw their website that they also sell door hinge bolt seperately that I can add to an order. Like they say,IF YOU DON'T KNOW WHERE YOU ARE GOING...yOU WILL BE WHERE YOU HAVE NEVER BEEN BEFORE. 70ssflashback Jan 25th, 08, 10:50 PM How close is AMK on the wheel well molding trim screws for 70's?Are the SS? Freddy Mercado Jan 26th, 08, 12:21 PM I have to agree with Tom. AMK is the most complete you can get. They have it in kits or however you want it. Good place to start. bowtie6872 Jan 26th, 08, 4:01 PM So they don't continue to rust (which they will) and sieze all the bolts up. Worst thing you can do is wire wheel a bolt, paint it and reuse it.). what the new one not rust... they stainless?? wirewheeled/cleaned bolts with grease on the treads/then painted(heads) don't rust any faster than the new bolts would.. and alot cheaper am I missing something gspan1830 Jan 26th, 08, 9:48 PM what the new one not rust... they stainless?? wirewheeled/cleaned bolts with grease on the treads/then painted(heads) don't rust any faster than the new bolts would.. and alot cheaper am I missing something I've done the same thing and never had a problem either. 350_Malibu Jan 26th, 08, 10:05 PM what the new one not rust... they stainless?? wirewheeled/cleaned bolts with grease on the treads/then painted(heads) don't rust any faster than the new bolts would.. and alot cheaper am I missing something OK, good luck with that!:yes: | ||