You all may have heard but I've been through 2 fel-pro one piece oil pan gaskets because both of them leaked out the bolt holes because I have an aftermarket Milodon stroker 7 quart pan. I heard they're only made for the stock pans. And someone told me that I need an oil pan gasket with 5/16'' crush rings because the holes in my pan are 5/16'' (so they told me) and the fel pro gasket has 1/4'' and they said the crush rings go right through the oil pan holes.

Anyway, I was wondering if anybody here has used the Corteco one piece oil pan gasket and if they've had any luck. Also let me know if you used it with an aftermarket pan and which one. All help is appreicated. Thanks

Ryan Washington
www.RyansCustoms.com (http://www.RyansCustoms.com)