Ok, replacing wing window rubber and window felts on the elky. Which one do I want and is this all I need?

Ok so this is for the wing window, these are correct?

http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=JV-E82

http://www.ss396.com/mm5/graphics/00000009/JSS-5102.jpg

================================================== ================================================== ================

Now for the window felts, they come in a "4 piece", and a "2 piece outers", which one should I get?

"2 piece outers"
http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=CH193A&Category_Code=WEATHERSTRIP

"4 piece"
http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=CH192A&Category_Code=WEATHERSTRIP

================================================== ================================================== ============

Now for the lock kit, they dont list an el camino, I assume I can just use a 68 chevelle lock kit?

http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=LID-68F&Category_Code=OEMLOCKDOORCHEV

I believe this is a generic pic:
http://www.ss396.com/Merchant2/graphics/00000009/LID-65A.jpg

Thanks for your help guys, appreciate it. If you recommend I get them anywhere else then please let me know. :beers:

bump, plz guys? I just dont want to make a mistake. :o

68 Chevelle is the same as 68 El camino for the lock kit. Are you replacing the inner and outer window felts? If you are only doing the outer ones then buy the 2 piece. The wing window rubber you have pictured looks correct. One tip do not remove the pivot rivet on the wind window...instead drill out the two rivets on the top.

the vent window seals yes, the 2 or 4 piece winow felt depend on what you are doing for door panels, new complete door panels come with the 2 inner felts installed, you should get run channel http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=JDG-E3&Category_Code= and also the vent window run channel has the same tipe weatherstrip but couldn't find it.

lock cyl. kit is good

Thanks guys, how difficult is it to change the ignition lock in the dash?