Anyone know of any reputible machine shops to do some engine work for me. We had a winter accident which resulted in a cracked block and need to machine a new block to fit the old parts. Any help is appreciated!

Thanks!
Matt

http://www.watsonruppelperformance.com/
Watson Ruppel Performance Inc.
52745 State Route 147 Sarahsville, Ohio 43779
Ph. (740) 838-6405 or Fax. (740) 838-1100

Matt - I searched long and hard before I chose to work with Dave.
Dave has a crew of 4 plus himself that are full time. The shop is clean, well organized and nice to work with.
They have been in business since 1979, have an excellent reputation and are as honest as the day is long. From all of the machine shops I looked at finding all of these is rare.

They are 20 minutes from the 70-77 interchange in east central ohio.

It's 2 hours from my house and worth the drive

Bill

Gellner Engineering is another, in Parma. http://www.streetperformance.com/index.html?detailedlisting=1390

Where in Ohio are you located? Anywhere near the PA line?