What outer tie rods work with the B-body spindle? I just got some for a Impala, they fit the spindle fine but the size is different from the original sleeve, cant remember what I used before as I think I had a complete kit the last time.

I think '73-'77 Malibu outers will work.

Try this - Outer Tie Rod ends, 73-77 Chevelle, Moog ES427

Peter

I did that, they fit the spindle fine, not the connector, they are too big in the threaded area. I dont remember changing the entire set up before, just the outers.

82 and up camaro will fit

I have a set of G body outers. The taper will be the same but the threaded end is small, the same size as a 64 Chevelle. I can measure them for you if it would help.