I posted a few topics down about my wiring harness issue....In about an hour i will dig in to it. Any last minute suggestions would be appreciated....Thanks to those who replied!

Take notes upon disassembly.

Going pretty well, just fighting with 38 year old parts....Just got the lighting and starting system up.....Working out the bugs...

OK, all exterior lighting is up and on with the exception of 3 bad lamps, (One marker and two headlights) All directionals and 4 ways are good! Looks like i need a brake light switch and i should be in pretty good shape Lighting-wise. Dash is nice and Glowing Green. Directional indicators and High Beam indicator isn't working, but i very well may have a bad printed circuit....Or even lamps. Nothing more gratifying than when things of this nature start working. Far from done; but a nice size chunk is starting to come together...12 volts at the coil wire with the key on.....mmmm, mmmm Good! =)

It's not a bad idea to put all new lamps in the instrument cluster. There is a good amount of lumen depreciation over the years and new lamps will make the whole assembly a lot brighter for a few bucks.

It's not a bad idea to put all new lamps in the instrument cluster. There is a good amount of lumen depreciation over the years and new lamps will make the whole assembly a lot brighter for a few bucks.

Yeah, i do have a few dark spots.....It is a cluster that i bought off of a guy on e-bay and he told me the printed circuit MIGHT be bad....he sent me a set of "good bulbs"....hopefully a couple of them are bad....Thinking about going to get a dozen new ones (They're super cheap) and taking off the dash pad to go in from the top...Thanks for the reply SW!