|
69chevelle355 Jul 20th, 04, 3:25 PM i jsut got a used b&m pro stick from a swap meet and it came with the cable and everything. my question is where do i plug in the cable on my tranny? i previously had a column shifter so i don't know where to pop it in!!! thanks for your help -Jay Bobalos Jul 20th, 04, 5:37 PM there should be a bracket that has 2 holes that bolt through 2 bolts that go into the pan. the cable goes though that bracket (from the back forward) to the bracket that bolts to the trans shift rod. if you did not get 2 small flat brackets (one for the cable & one for the trans shift rod), you are missing parts. B&M has them on thier web site, if you want to get the p/n. http://www.bmracing.com/ Bob Redrum Jul 20th, 04, 11:35 PM You REALLY need to get a copy of the instructions before you try to install the shifter. You can hurt your tranny to the point of death if you do not set the shifter up correctly. The instructions may be on the B&M website. Pat Kelley Jul 21st, 04, 10:59 AM If you can't get the instructions from B&M, I have a copy and can fax it to you. I don't have anyway to scan it or send it via computer. 69chevelle355 Jul 21st, 04, 11:28 AM thanks for the warning guys! pat kelley-i don't have a fax, but maybe someone i know does...let me check and get back with you. THANKS!! -Jay | ||