Flowtech Ceramic Full Lengths. These look like there round ports, would they work ok with large oval closed chamber heads? Flowtech 31130-FLT

http://store.summitracing.com/default.asp?target=esearch.asp&N=110&Ntk=KeywordSearch&Ntt=chevelle

Or these Dynomax Headers, full length, all same except the brand, price and there also round ports. This is what I need? DYNOMAX 86110

http://store.summitracing.com/default.asp?target=esearch.asp&N=100&Ntk=PartSearch&Ntt=86110

I am very happy with my dynomax 86110s. I used copper gaskets too. Only thing I would do differently is install one of those dual line header plugs that lets you open the headers if you go to the track, or if you just want to blast thru the neighborhood.

Yeah that'd be nice graemlins/beers.gif Im sure they'd hear you coming. I planned on tossing the cheapo gaskets and going with copper ones. I had Flowtech shorty headers on my small block, was pretty happy with them. Theres like a $45 difference on the 2 here.

Anyone else use or reccomend one of these 2? smile.gif The ports will be fine wont they?

A few recent posts on dynomax headers and header gaskets
headers (http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi/topic/35/2974.html?)
more headers (http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi/topic/35/3054.html?)
gaskets (http://www.chevelles.com/cgi-bin/forum/ultimatebb.cgi/topic/35/2930.html?)