Just wondering if someone could plug my info in and see how I come out, I'm on a really tight budget so I know there is bigger and better, but on my budget this is what I came up with:
350 C.I. Chev
Flat top pistons
Performer RPM aluminum heads, part # 60899
Performer RPM Intake #7101
Holley 750 Mechanical secondaries
Headers
Comp Cams part# 12-677-5
Solid lifters
236/242 Duration @ .050\
.501/.510 Lift
110 degree lobe sep.
1.5 ratio full roller aluminum rockers

Manual trans 5 Speed 85 camaro is what its going in.

I sure would appreciate someone plugging in this combo and telling me how it comes out. I know it always estimates a litle high but its a decent referance.

Thanks in advance!!

Scot


Flow info on heads:
Intake/Exhaust .100" 67/58
Intake/Exhaust .200" 130/108
Intake/Exhaust .300" 183/144
Intake/Exhaust .400" 226/169
Intake/Exhaust .500" 229/175
Intake/Exhaust .600" 232/182
@ 28 inches H2O

Scot,

Can you give me the Cam timing events for your cam? I need the Intake Opening and Closing, as well as the Exhaust.

If you can get me that I will plug it in for you.