Im restoring a 66 dashboard for my 67 chevelle because the one in it is all cut up and i have the light,wiper switch,and ignition taken off but im having a problem with the cigarette ligther.How can i take this off without damaging it or the strip? Tom.:confused:

tom, i am in the process of doing the same thing, on mine i unscrewed the outer housing, the one with the teeth, then push out the heating elment or if it is stuck it can stay in the trim, hope this helps.

leon

I may be mistaken, but a 66 dash will not work in a 67 due to the fact that the 67 steering column is larger. The opening in the dash is different between the two years, as well as the spacing between the upper light switch and wiper switch.

I may be mistaken, but a 66 dash will not work in a 67 due to the fact that the 67 steering column is larger. The opening in the dash is different between the two years, as well as the spacing between the upper light switch and wiper switch.

Your correct about the steering column differences. The trim mounting holes are also different, so swapping some dash parts between the two years will not always work.

Thanks guys. it looks like i will have to look for a 67 dash.I had this one left over from a 66 ss i used to have, and i thought it would work.I guess i will have to sell this one online.Tom

Can a 67' dash (including steering column) work in a 66' car?

Thanks
Tod

I wish you lived closer, I have a '67 dash and need a '66:(

Don't some people take the steering column out of a 66 and swap it for a 67 setup because of the issure of saftey and the collapsiable 67 column?

I wish you lived closer, I have a '67 dash and need a '66:(
How far away do live i may be willing to pay for shipping of both dashes if you want to swap.Tom:D

Can a 67' dash (including steering column) work in a 66' car?

Thanks
Tod

sure