I can only find one clip out on the net of a BBC with a Voodoo 60203 camshaft.
Would someone send me a clip or point me in the right direction.
The clip I found was a 396 Chevelle and I am wonder how much my 60 more cubes of my motor will cover up the lope of the cam

Thanks in advance for the help

Bill

In my sig is my motor minutes after breaking the cam in. I had to keep it around 2500, but you might catch the odd lope. Click on both my links. One is the vid, and the other is the specs. I sure like the sound of it. I've had it running a few times since, and been able to get it to idle down to about 800. Sounds decent, and excellent throttle response with my setup.

John Thanks for the clip!!!
Your set up is almost spot on for what I am building, just kicking around the 60204 Vs the 60203.
Anybody else want to chime in???

go with the 60203 unless you are over 10 to 1 comp & are running 3.73 & a 2500+ stall.

dreis - I fall right on the boarder, 9.5-1 comp, 4-11 gears, 3000 stall but I have a 4000 pound truck with 15" wide steel wheels to push around the block

I'd use the 60204 since you have the gear & converter

I can only find one clip out on the net of a BBC with a Voodoo 60203 camshaft.
Would someone send me a clip or point me in the right direction.
The clip I found was a 396 Chevelle and I am wonder how much my 60 more cubes of my motor will cover up the lope of the cam

Thanks in advance for the help

Bill

Here's a clip of my jalopy idling through mufflers/tail pipes...461, 9.4 cr, 60203 cam, head work, super comps.

http://bis.midco.net/2drpost/1967%20Jalopy.wmv

MAN I LOVE THAT SOUND.:thumbsup:

Here's a clip of my jalopy idling through mufflers/tail pipes...461, 9.4 cr, 60203 cam, head work, super comps.

http://bis.midco.net/2drpost/1967%20Jalopy.wmv

That is exactly how my old 67 sounded back in 82. It had the old Crane Fireball cam. Hearing your car brought back some good memories!!:yes: