I recently bought a used(hardly) set of these wires and they have the 90 degree ends which hit my header flange on the 402. Not sure if I need 45's or straight ends and it would depend how long the ends are. Anyone recommend an end and where to buy just the ends? Once I take the 90's off are they of use to anyone as I'm assuming they were crimped on there?

Scott,
Most Big Blocks that I have seen work best with the 135 degree ends, or the type that you can bend to whatever angle you need. I think both Accel and Moroso make the "vari" angle type.

I have the Taylor Wires on my Big Block and am Happy with the 45degree angle head.They dont make contact with the Headers at all.

I run straight boots with no clearance problems what so ever.

Taylor 135 degree boots here bbc no problem

taylor 135 boots here and always............use to run straight and 45 but always seem to be to close to something.......the 45 boots i did have years ago i found longer plugs to help keep the boot away from the flange.........

Taylor 135s on my big block too graemlins/thumbsup.gif No issues at all.